Saturday, May 25, 2024
Google search engine
الرئيسيةChemicals&MaterialsSeveral lubrication methods for different bearings pour point depressant for lubricating oil

Several lubrication methods for different bearings pour point depressant for lubricating oil

Oil storage tank infiltration approach: This is a common lubrication technique, especially suitable for reduced to medium-speed operating atmospheres. The self-aligning sphere bearing is partly submersed in lubricating oil. When the component revolves, the lubricating oil is gotten and after that flows back into the oil sump. The oil level need to be somewhat lower than the facility of all-time low of the ball to make sure optimal lubrication.

Oil trickling technique: For bearing components that need specific quantities of lubricating oil, the oil dripping method is a good choice. The regularity of oil dripping is usually managed to one decrease every 3 to 8 secs. Extreme lubricating oil might trigger the bearing temperature to increase.

(bearings lubrication)

Flow method: This approach uses an oil pump to transfer filteringed system lubricating oil to the bearing elements. The lubricating oil, after going through the bearing, is filtered and cooled prior to reuse. Considering that circulating oil can properly remove warmth, this approach is particularly ideal for high-speed bearing components.

Spray method: Mix dry compressed air and lubricating oil through a sprayer to form an oil mist and spray it onto the bearing. This approach can not only successfully lower the bearing temperature but additionally prevent the intrusion of impurities. It is specifically ideal for bearing lubrication in high-speed and high-temperature settings.

Injection method: Utilize an oil pump to infuse high-pressure lubricating oil straight onto the bearing via a nozzle, and then the lubricating oil streams right into the oil groove from the various other end of the bearing. When the bearing rotates at high speed, the high-speed turning of its rolling components and cage will certainly create air flow. This technique can effectively use this air movement for lubrication.


Infomak is dedicated to the technology development of special oil additives, combined the Technology of nanomaterials developed dry lubricant and oil additives two series. It accepts payment via Credit Card, T/T, West Union and Paypal. Infomak will ship the goods to customers overseas through FedEx, DHL, by air, or by sea. If you are looking for high-quality pour point depressant for lubricating oil, please feel free to contact us and send an inquiry.

Inquiry us

    مقالات ذات صلة
    - Advertisment -
    Google search engine

    الأكثر شهرة

    احدث التعليقات